STEEL PARTS

MaterialStainless Steel: 303, 304, 304L, 316, 316L, 416, 420, 310 etc...
Carbon Steel: 20#, 45#, 12L14, 1215,Q235,40Cr,25CrMo…
Aluminum: 5052, 6061-T6, 6061-T4, 6082-T6, 6063-T6..
Brass and Copper: C3602, C3604, H62, C3400,H59-1,H62...etc
Other: POM,Nylon,PVC...etc
Finish anodizing, blackening, plating, polishing, coating, Nickel,Zinc , Chrome,Sliver Plating etc.

WCB (carbon steel), LCB (low temperature carbon steel), LC3 (3.5% nickel steel), WC5 (1.25% chromium 0.5% molybdenum steel), WC9 (2.25% chromium), C5 (5% chromium 0.5% molybdenum), C12 (9% chromium 1% molybdenum), CA6NM (4 (12% chromium steel), CA15 (4) (12% chromium), CF8M (316 stainless steel), CF8C (347 stainless steel), CF8 (304 stainless steel), CF3 (304L) Stainless steel), CF3M (316L stainless steel), CN7M (alloy steel), M35-1 (Monel), N7M (Haast Nickel Alloy B), CW6M (Hasta Nickel Alloy C), CY40 (Inconel) Wait.

Features of IKO Mini Linear Bushing Bearings
KO miniature linear bush bearing is an extremely small linear motion guide machine that rotates with the shaft, makes infinite linear motion in the direction of the shaft while contacting, and has a shaft diameter of 3~5mm. Features are:

Low friction resistance:

Due to the correct orientation of the retainer, the steel ball can perform stable linear motion with minimal frictional resistance

Stainless steel:

Stainless steel series are also available, suitable for applications requiring corrosion resistance

Sophisticated design:

Very small size, can be designed in sophisticated machinery/equipment

Rich changes:

In addition to the standard type, there are also a series of high-rigidity long types, which can be selected according to the application.

1). In plastic molds, separating the product from the mold is also the most commonly used;

2). Carbide thimble, such as tungsten steel thimble, can be used to pass longer and finer holes;

3). The thimble is also called the top. It is a conical metal round rod with a head that is assembled on a lathe or a grinder to support the workpiece and make the workpiece rotate around it, but it is completely different from the thimble of the plastic mold accessories;

4). Plastic mold thimble can also be used inside the mold, it can play a stabilizing role, and is called insert needle.

The types of plastic mold thimble include: flat thimble, dome pin, cradle pin, standard thimble, non-standard thimble, etc.

The materials of the plastic mold thimble are SKH51, SKD61, SKD11, 65Mn, etc.

SKH51 thimble has better toughness than SKD61; SKD61 thimble can withstand high temperature of 1600℃, and the surface of SKD61 thimble can improve the wear resistance of thimble after nitriding. 65Mn thimble is of poor quality, brittle and easy to break. Some plastic molds are no longer assembled and used with 65Mn thimble.

1. The hardness of the working part of the rolling wheel is 59.5-62.5HRC

2. Rolling wheel for ring rolling,is pair for one set.